Serving Clearfield, UT

Push-Back Racking in Clearfield, UT

Component staging at Clearfield's manufacturing facilities often involves more SKU variety than a drive-in lane can handle cleanly, and push-back's front-only access still frees up the rear-aisle space a full selective layout would use.

Start planning your layout View Product Details

Push-Back Racking Solutions for Clearfield Warehouses

Clearfield is home to Defense Depot Ogden and significant industrial activity in Davis County. The city's warehouse sector serves both government and commercial customers, with strong demand for compliant storage systems from defense contractors and logistics providers.

Push-back racking is a last-in, first-out (LIFO) deep-lane system accessed from a single front aisle. Each pallet is placed on a nested cart that rides on inclined rails. As a new pallet is loaded, it pushes the previous pallet back on the rail. When the front pallet is removed, gravity returns the remaining pallets forward to the pick face. Push-back systems handle 2–6 pallet depths and strike a practical balance between storage density and SKU selectivity: better density than selective racking, but better selectivity than drive-in racking: a different SKU can occupy each position in the lane.

For distribution centers and warehouses managing a medium number of high-volume SKUs, push-back racking is often the optimal storage solution. You can dedicate multiple lanes to your highest-velocity products, giving those SKUs deep inventory reserves accessible from a single aisle, while maintaining the flexibility to assign different SKUs to different lanes without the operational constraints of a drive-in system. The result is a storage system that delivers high density and operational flexibility simultaneously.

Rocky Mountain Warehouse Solutions designs and installs push-back racking systems for food and beverage distributors, cold storage facilities, manufacturing operations, and general merchandise warehouses across Utah and the Mountain West. Every system includes an engineered load capacity label, a cart and rail configuration optimized for your pallet type and weight, and installation by our experienced crews. We also service existing push-back systems, replacing worn carts, damaged rails, and bent components.

Davis County: defense logistics documentation and Wasatch Front seismic

Davis County runs along the I-15 corridor between Salt Lake City and Ogden and sits over the Wasatch fault zone, so racking here carries the same seismic design expectations as the rest of the Front: engineered anchorage, base plate calculations tied to the specific slab, and bracing appropriate to the upright height rather than a generic configuration.

What sets Davis County apart is documentation. Hill Air Force Base and the surrounding defense logistics operations, along with the concentration of contractors in and around the Freeport Center in Clearfield, mean a large share of facilities here work under government contract requirements. Those customers routinely need audit-ready records rather than just working hardware: preventive maintenance schedules, inspection sign-offs, engineered load capacity labeling, and retained anchor and as-built documentation. We build that into the project from the first installation instead of assembling it later when a contract review asks for it, because reconstructing it after the fact is considerably harder.

Permitting runs through Davis County and the individual cities including Layton, Clearfield, Bountiful, Kaysville, Farmington, and North Salt Lake. Requirements and review practice differ between them, so we verify with the jurisdiction that covers your facility during layout rather than carrying a Salt Lake County assumption north.

Codes, Compliance, and Enforcement in UT

Utah is a state where storage racking is engineered, not just assembled. Steel storage racks are treated as nonbuilding structures under ASCE 7 with their own design provisions, and much of Utah's warehouse square footage sits in parts of the state where seismic load is a governing design factor rather than a formality. In practice that means engineered base plates, anchor patterns calculated against the actual slab rather than a catalog default, limits on unbraced upright height, and in taller configurations additional row bracing or a deliberate seismic separation from the building structure. How much of that applies depends heavily on where in Utah the facility sits, which is why we work the seismic question at the county and site level rather than quoting a single statewide answer.

Permitting in Utah is local. There is no statewide storage rack permit threshold; county and municipal building departments set their own requirements for when an installation needs a permit, stamped drawings, anchor calculations, and load capacity documentation. Review practice varies noticeably between jurisdictions, so we confirm requirements with the authority having jurisdiction over your specific building during layout rather than after the racking is on site. Slab condition is the input buyers most often overlook: anchor pull-out values depend on concrete depth, compressive strength, and proximity to joints and slab edges, so an older building can drive a different base plate design than a new tilt-up shell in the same city.

Workplace safety enforcement is genuinely statewide. Utah operates its own OSHA-approved State Plan through Utah Occupational Safety and Health, a division of the Utah Labor Commission, rather than relying on federal OSHA. There is no rack-specific OSHA standard anywhere in the country, but storage systems are reachable through general materials handling and storage requirements and the general duty obligation to provide a workplace free of recognized hazards. We design to RMI ANSI MH16.1, provide engineered load capacity labeling on every installation, and retain the anchor, as-built, and inspection documentation that a UOSH inspector, an insurer, or a plan reviewer is likely to ask for.

Technical Specifications & Buying Guide

Push-back racking uses a series of nesting carts (typically 2 carts for a 3-deep system, 3 carts for a 4-deep system, and so on) that stack on top of each other at the front of the lane when empty. Each cart rides on inclined rails attached to the pallet rack beams, sloped at approximately 3/8 inch per foot toward the pick face. When a pallet is placed on the front cart, the operator pushes it back to place it behind the front position, nesting the carts together. Each subsequent pallet loads behind the previous one. When the front pallet is retrieved, the remaining carts and pallets flow forward under gravity to the pick face.

Cart capacity is a critical specification. Standard push-back carts are rated for 2,500–3,500 lbs per pallet position for 2–3 deep systems. Heavy-duty carts for 4–6 deep systems with heavier loads require structural-grade cart components and heavier rail sections. The incline angle and cart design must be carefully matched: too shallow an incline and pallets may not return to the pick face reliably; too steep and pallets arrive with excessive speed. Properly engineered push-back systems from Unarco, Mecalux, or other reputable manufacturers account for these variables across a range of pallet weights.

The operational advantage of push-back versus drive-in is significant in multi-SKU environments. In a drive-in lane, only one SKU can occupy the lane (any retrieval requires taking the front pallet, which may not be the desired SKU unless the lane is dedicated to a single product). In push-back racking, the front pallet is always the most recently loaded, meaning a single lane can contain multiple pallets of the same SKU loaded at different times, or in some warehouse configurations, different SKUs if LIFO rotation is acceptable for those products. The front-only access from a single aisle also means no sacrificial aisle is needed at the back of the system, recovering that floor space for additional storage.

Key Benefits of Push-Back Racking in Clearfield

Better SKU selectivity than drive-in racking
Single-aisle access from the front only
LIFO rotation for non-date-sensitive products
2–6 pallet depths available
Gravity-powered return: no electricity needed
Works with standard counterbalance forklifts
Higher density than selective racking

Push-back racking system with nested cart lanes

Forklift loading pallet into push-back system

Push-back rack cart and rail close-up detail

Industries We Serve in Clearfield

Food and beverage

Push-Back Racking systems tailored for the operational requirements of food and beverage facilities in Clearfield.

Distribution and logistics

Push-Back Racking systems tailored for the operational requirements of distribution and logistics facilities in Clearfield.

Manufacturing

Push-Back Racking systems tailored for the operational requirements of manufacturing facilities in Clearfield.

Cold storage

Push-Back Racking systems tailored for the operational requirements of cold storage facilities in Clearfield.

Retail distribution

Push-Back Racking systems tailored for the operational requirements of retail distribution facilities in Clearfield.

E-commerce fulfillment

Push-Back Racking systems tailored for the operational requirements of e-commerce fulfillment facilities in Clearfield.

Common Use Cases in Clearfield

Medium to high volume SKU storage

Our Clearfield installations for medium to high volume sku storage are engineered to perform under real operational conditions, not just spec sheets.

Cold storage density improvement

When Clearfield facilities need Push-Back Racking for cold storage density improvement, we provide turnkey solutions that cover design, procurement, installation, and documentation.

Non-perishable product bulk storage

Facilities in Clearfield use our Push-Back Racking systems for non-perishable product bulk storage because we deliver configurations that actually match how their operation works.

Reducing forklift aisle count

Push-Back Racking systems we install in Clearfield for reducing forklift aisle count are sized for your current needs and designed to scale as your operation grows.

Transitional inventory buffer

Our team helps Clearfield businesses implement Push-Back Racking solutions tailored specifically for transitional inventory buffer at any scale.

Why Clearfield Businesses Choose Rocky Mountain Warehouse Solutions

From initial design through installation and follow-up inspection, our team manages every step of your Push-Back Racking project in Clearfield.

We carry new and certified-used Push-Back Racking inventory, giving Clearfield businesses flexible options that match their budget without compromising safety or compliance.

Whether your Clearfield operation runs one shift or three, Push-Back Racking systems from Rocky Mountain Warehouse Solutions are built to handle the throughput demands of active warehouse environments.

We handle Push-Back Racking projects in Clearfield from start to finish — layout design, product procurement, delivery coordination, installation, and post-project documentation. You don't need to manage multiple vendors.

Frequently Asked Questions About Push-Back Racking in Clearfield

What is the load capacity per level for push-back racking?

Push-back systems are typically rated for 2,500 to 3,500 lbs per pallet position for standard 2–3 deep configurations. Heavy-duty systems for 4–6 deep lanes can support 3,500–5,000 lbs depending on the cart and rail specification. We provide engineered load capacity labels for every installation.